How can I set up one PC for instance? My PC has access to the internet via 192.168.0.2 > Router 192.169.0.1 but I want to RTSP using VLC streaming accessing the subnet of the NVR 192.168.1.XXX where XXX represents an individual camera, one of 16 cameras. Maybe even use a program like Motion to view the IP cams from a different room to where the NVR is located. I would like my PC's and tablet to be able to rtsp into the IP cams using the IP cameras subnet 192.168.1.x to maintain them directly and to view the streams via my tablet or PC. The IP cameras are all set up with the IP range 192.168.1.x (not 0.x) I haven't activated the external access yet. It’s FREE, so give it a try to see how it goes.
#SCW NETWORKER PRO CAMERA IN OTHER SUBNET PORTABLE#
Advanced IP Scanner is a portable executable, that you can use to access network shares, remote control via RDP, MAC address detection, etc. The NVR has an IP address of 192.168.0.60 and it's possible to connect from the outside into the NVR via RTSP. One of the popular scanners downloaded more than 30 million times offer you to analyze your LAN in a minute. Other GigE Vision cameras through third party licensing.
Swing Catalyst also supports several gigabit Ethernet cameras from different manufacturers such as: AVT, FLIR / Point Grey & IDS. In it, go to the LAN IP settings section or tab, and change the value of the Subnet Mask with the one you want. Basically: Separate subnet (10.29.1.1/24 instead of 192.168.1. On the routers web admin interface, look for an advanced settings category called LAN. This is configured with my new UDM Pro SE, which has a 2.5 GBE WAN port and built in PoE which I quite like. Swing Catalyst supports the GigE Vision standard through a licensed USB dongle. I recently set up my home network with a IOT subnet. Internet modem/router with IP range of 192.168.0.Xĭebian PC's and Android tablets are connected to that via Ethernet cabling or Wifi. GigE Vision is an interface standard for machine vision cameras.
0 kommentar(er)
